User Manual for OMNI-IP Network Cameras
75
Check the
Enable Event-triggered Snapshot
checkbox to check event-triggered
snapshot.
3.
Select the quality of the snapshot.
4.
Set the time interval between two snapshots.
5.
Click
Save
to save the settings.
Uploading to FTP
You can follow below configuration instructions to upload the snapshots to FTP.
Upload continuous snapshots to FTP
Steps:
1)
Configure the FTP settings and check
Upload Picture
checkbox in FTP Settings
interface. Please refer to
Section 6.3.10
Configuring FTP Settings
for more
details to configure FTP parameters.
2)
Check the
Enable Timing Snapshot
checkbox.
Upload event-triggered snapshots to FTP
Steps:
1)
Configure the FTP settings and check
Upload Picture
checkbox in FTP Settings
interface. Please refer to
Section 6.3.8
Configuring FTP Settings
for more details
to configure FTP parameters.
2)
Check
Upload Picture
checkbox in Motion Detection Settings or Alarm Input
interface. Please refer to
Step 3
Set the Alarm Actions Taken for Motion
Detection
in
Section 6.6.1, or Step 4
Configuring External Alarm Input
in
Section 6.6.4.
3)
Check the
Enable Event-triggered Snapshot
checkbox.
