KT&C KNC-p3 Series User Manual Download

Page: 50 / 95

User Manual for OMNI-IP Network Cameras

illumination levels.

Figure 5-28

Day/Night Scheduled-Switch Configuration Interface

Steps:

Click the time line to select the start time and the end time of the switch.

Click Common tab to configure the common parameters applicable to the day

mode and night mode.

Note:

The detailed information of each parameter please refers to day/night auto switch

session.

Click Day tab to configure the parameters applicable for day mode.

Click Night tab to configure the parameters applicable for night mode.

Note:

The settings saved automatically if any parameter is changed.

5.5.2

Configuring OSD Settings

Purpose:

You can customize the camera name and time on the screen.

Steps:

Enter the OSD Settings interface:

Configuration > Advanced Configuration > Image > OSD Settings

Summary of Contents for KNC-p3 Series
































































































Search results

Summary of Contents for KNC-p3 Series

Reviews:

Related manuals for KNC-p3 Series

Brands by name

Popular brands

KT&C KNC-p3 Series, User Manual

Search results

Summary of Contents for KNC-p3 Series

Reviews:

Related manuals for KNC-p3 Series

Brands by name

Popular brands