User Manual for OMNI-IP Network Cameras
48
the scene affecting the image quality.
White Balance
White balance is the white rendition function of the camera used to adjust the color
temperature according to the environment.
Figure 5-27
White Balance
Image Enhancement
Digital Noise Reduction
: DNR reduces the noise in the video stream. Set the DNR
level from 0~100, and the default value is 50.
Video Adjustment
Mirror
:
It mirrors the image so you can see it inversed. Left/Right, Up/Down, Center,
and OFF are selectable. “Center” is a 180 degree rotation (e.g. if the camera module
was upside-down, choosing ‘center’ will show an ‘upright’ image).
Rotate
:
To make a complete use of the 16:9 aspect ratio, you can enable the rotate
function when you use the camera in a narrow view scene, such as a HALLWAY.
When installing, turn the camera to the 90 degrees or rotate the 3-axis lens to 90
degrees, and set the rotate mode as on, you will get a normal view of the scene with
9:16 aspect ratio to ignore the needless information such as the wall, and get more
meaningful information of the scene.
Video Standard
: 50 Hz and 60 Hz are selectable. Choose according to the different
video standards; normally 50 Hz for PAL standard and 60 Hz for NTSC standard.
Capture Mode
: It’s the selectable video input mode to meet the different demands of
field of view and resolution.
Day/Night Scheduled-Switch
Day/Night scheduled-switch configuration interface enables you to set separate
camera parameters for day and night to control the image quality in different
