User Manual for OMNI-IP Network Cameras
35
The IEEE 802.1X standard is supported by the network cameras, and when the feature
is enabled, the camera data is secured and user authentication is needed when
connecting the camera to the network protected by the IEEE 802.1X.
Before you start:
The authentication server must be configured. Please apply and register a user name
and password for 802.1X in the server.
Steps:
1.
Enter the 802.1X Settings interface:
Configuration >
Advanced Configuration >
Network > 802.1X
Figure 5-15
802.1X Settings
2.
Check the
Enable IEEE 802.1X
checkbox to enable the feature.
3.
Configure the 802.1X settings, including EAPOL version, user name and
password.
Note:
The EAPOL version must be identical with that of the router or the switch.
4.
Enter the user name and password to access the server.
5.
Click
Save
to finish the settings.
Note
:
The camera supports Wi-Fi function doesn’t support 802.1X.
5.3.7
Configuring QoS Settings
Purpose:
QoS (Quality of Service) can help solve the network delay and network congestion by
configuring the priority of data sending.
