User Manual for OMNI-IP Network Cameras
10
8000. The default user name is admin, and password is 12345.
For accessing the network camera from different subnets, please set the gateway for the network camera,
either after you logged in or though the “modify Network Parameters” applet. For more detailed
information, please refer to
Section 6.3.1
Configuring TCP/IP Settings
.
Figure 2-3
OMNI Finder Interface
2.2
Accessing a Network Camera over a WAN
Purpose:
This section explains how to connect a network camera to a WAN with a static WAN IP or a dynamic WAN
IP.
2.2.1
Static IP Connection
Before you start:
Please find out the static IP from your ISP (Internet Service Provider). With a static IP address, you can
connect the network camera via a router (with that static IP address set on the WAN side of the router) or
you can set WAN static IP in the camera and connect the camera directly to the WAN.
Connecting the network camera to a WAN via a router