KSR Ride Speedy, Repair Manual

Page: 66 / 79

ELECTRICAL SYSTEM/ LIGHTNING SYSTEM
66
REAR TURNING LIGHT REPLACEMENT
1. Remove the rear side body panel.
2. Remove the six screws (1) to remove
the rear turning light (2).
REAR LIGHT REPLACEMENT
1. Remove the rear side body panel.
2. Remove the three screws (1) to remove
the rear mudguard (2).
3. Remove the four screws (3) to remove
the rear light (4).
Due to the front turn lights, rear lights, rear turn lights are LED,
when they are broken, only for the whole lamp.
TROUBLESHOOTING
FAILURE CAUSE TO DO
Lights do not come on when ignition
switch is on
Burned bulb or lights
Replace bulb or
lights
Faulty switch Replace switch
Broken or shorted wire Check and repair
Fuse blown Replace fuse
Weak battery
Charge battery or
replace it
Poor contact of connecting
wire
Check and repair
Light dims
Faulty converter Replace converter
Wire or switch resistance too
high
Check and clean/
repair
Faulty regulator/rectifier Check and replace
Headlight does not change when
dimmer switch is turn to Hi or Lo
Faulty or burned bulb Replace bulb
Faulty dimmer switch Check and replace
1
1
2
1
2
3
4
NOTE