KSR Ride Speedy, Repair Manual

Page: 51 / 79

SUSPENSION 51
4. Lift the handle bar up (arrow) and away.
5. Remove the fixing nut (7) and remove the
adjustment nut.
6.Remove the bearing components. Details
see chapter steering.
7. Remove the front fork.
8. Reassemble in reverse order.
Before the assembling grease the bearing race and
the front axle.
FRONT SUSPENSION FORK LEG REPLACEMENT
1. Place an appropriate supporting stand under the engine in
order to raise the front wheel up.
2. Remove the front middle cover (2), the front mudguard (3),
the front wheel (4) and the front brake calliper as shown in
the picture (A) on the side before.
1. When you replace parts 1 and 2 it is recommended
to disconnect all electric wires.
2. When you replace the front brake calliper you must
Release the brake hose from the triple tree but it is
not recommended to disconnect the brake hose from
the front brake calliper or the master brake cylinder.
3. Remove the required bolt (6) and replace defect fork
leg.
4. Reassemble in reverse order.
REAR SUSPENSION REPLACEMENT
1. Place an appropriate supporting stand under the engine
in order to raise the rear wheel up.
2. Remove the upper bolt M10×40 (1) and the lower bolt
M8×1.25×35 (2)
3. Reassemble in reverse order.
Only one side (left side) is illustrated
NOTE
NOTE
NOTE
6