KSR Ride Speedy, Repair Manual

Page: 45 / 79

BRAKES 45
BRAKE PAD WEAR INSPECTION
Reduced braking efficiency caused by worn brake pads.
Change worn brake pads immediately. Always replace the brake
pads in pair.
Front: See page:29
Rear: See page: 30
BRAKE DISC INSPECTION
Check the thickness of the front disc (1) at several places on the
Disc to see if it confirms to measurement.
See page: 30
BRAKE DRUM INSPECTION
Check the inner diameter of the brake drum (1) at several
places on the drum to see if it confirms to measurement.
See page: 31
BRAKE FLUID
△
！
WARNING
1. Never use dirty or unspecified brake fluid or mix different
Brake fluid because it will damage the brake system.
2. Brake fluid spilled on brake pads or brake disk will reduce
the braking effect. Clean the brake pads and brake disk
with a high quality brake degreaser.
3. When servicing the brake system, use shop towels to cover
plastic parts and coated surfaces to avoid damage caused by
splash of brake fluid.
4. Do not allow dust or water to enter the brake system during
refilling.
5. Brake fluid should be replaced at least every 2 years.
SPECIFICATION - FRONT BRAKE
Brake fluid type CASTROL SUPER DISK BRAK E FLUID DOT 4
Brake fluid boiling temperature > 170 °C
Brake fluid water content <3%