KSR Ride Speedy, Repair Manual

Page: 61 / 79

ELECTRICAL SYSTEM/ GENERAL/ SWITCHES
61
MAIN SWITCH INSPECTION
1. Remove the side covers and the leg protection
with floor panel.
2. Disconnect the main switch plug (3P) (1).
3. Use a continuity tester to measure the main switch
as shown in the illustration.
4. If the main switch do not work correct replace it.
MAIN SWITCH REPLACEMENT
1. Follow points 1 and 2 from above description.
2. Disconnect the seat cable (2).
3. Remove the two bolts (3).
The main switch is combined with the steering lock.
When you turn the handle bar to the left, turn the key
of the main switch to the lock symbol and pull the key
out the steering is locked. If the steering lock do not
work correct replace the main switch. Follow the
description above.
HORN INSPECTION
1. Remove the front cover.
2. Disconnect the horn wire.
3. The horn is works correct if it sounds when a 12V
battery is connected to the terminals (1). Consider
the correct connection of plus and minus pole
during the inspection.
4. If the horn do not work correct replace it. If the horn
work connected to a battery but not when connected
to the handle switch left check the cables and the
horn switches.
5. Disconnect the cables coming from the horn (green/
light green).
6. Use a continuity tester to measure the horn cables as
shown in the illustration.
R Y
G Lg
left horn switch
left horn switch
pressed
NOTE
3
1
2