77
6
8
7
3
5
1
4
2
ENGINE
EXPLODED VIEW/ PART LOCATION - THERMOSTAT
THERMOSTAT AND SECONDARY AIR SYSTEM INSTALLATION
1. Install the parts in reverse order.
2.
5H¿OOWKHFRRODQWV\VWHP
3. Do not forget the cooler.
4. Remove the bleed screw (1) to bleed the system.
5.
5H¿OOWKHV\VWHP%\UH¿OOLQJWKHFRROHULWFDQEHSRVVLEOHWKDWWKH
FRROHUKRVHPXVWEHNLQNWR¿OOWKHFRRODQW
6. Tighten the screw (1) and start the engine till the large circuit open.
7.
$OVRUH¿OOWKHZKROHV\VWHPEOHHGLWDJDLQDQGWLJKWHQWKHEOHHG
screw (1).
!
WARNING
The coolant is very hot
ENIGNE INSTALLATION
1. Install the engine in reverse order.
2.
5H¿OOWKHHQJLQHDQGWKHWUDQVPLVVLRQRLO!VHHSDJH
TORQUE LIST - ENGINE
Fastening area and fastener name
Tightening torque [Nm]
Cylinder cover nut
25-28
Oil-discharge bolt
22-25
Spark plug
10-15
Mould assembling bolt
10-12
Variable-speed chamber bolt
10-12
0RWRU¿[LQJEROW
10-12
2LOSXPS¿[HGEROW
10-12
Oil pump chain wheel bolt
10-12
/RFNQXWRIÀ\ZKHHO
50-60
Right-cover stud
10-12
&KDLQUHJXODWRU¿[HGEROW
10-12
PART LIST - THERMOSTAT
1. Screws
2. Bleed
screw
3. Thermostat-room
body
4. Sealing
ring
5. Thermostat
component
6. O-type
ring
7. Sensor
component
8. Upper cover of thermostate room
INSPECTION - THERMOSTAT
Initial startup temperature
72-84°C
Full-open temperature
&
Lift in full-open state
Over 4.27 mm
1
