59
ENGINE
CRANKCASE REMOVAL
1. Remove the three screws (1).
2. Pull off the right crankcase.
NOTE
•
If it is necessary usa a soft hammer to top on the case half.
•
Tap only on reinforced portions of case
•
Work slowly and carefully
•
If the case don´t seperate, check for remaining cases bolts or
¿WWLQJ
• Don´t
force.
CRANKSHAFT REMOVAL
1. Pull out the crankshaft (1) (arrow).
NOTE
,ILWLVGLI¿FXOWWRSXOORXWWKHFUDQNVKDIWORRNWRWKHWLPLQJFKDLQ
OIL SEALS REMOVAL
1. Replace the oil seals after every disassembly.
CRANKSHAFT INSPECTION
1.
0HDVXUHWKHFRQQHFWLQJURGD[LDOVLGHFOHDUDQFH$
Allowable Limit (A) : 0.55 mm
2. Measure the connecting rod radial clearance in X and Y di-
rection.
Allowable Limit (X/Y): 0.05 mm
1
1
A
Y
X
