66
ENGINE
3. Dismantle the guide pin (3).
4. Take off the oil seal (4).
5. Take down the left driven wheel (5).
CLUTCH SPRING INSPECTION
1. Measure the free length (C) of the clutch spring.
Allowable limit (C): 140 mm
DRIVEN DISC ASSEMBLY
1. Assemble the driven disc in reverse order.
CLUTCH INSPECTION
1. Check abrasion of the friction panel of clutch (1).
2. Measure the thickness (A) of the friction pnael
Allowable limit (A): 1.5 mm
CLUTCH ASSEMBLY
1. Assemble in reverse order.
CLUTCH DRUM INSPECTION
1. Check abrasion of the outside sleeve of the clutch.
2. Measure the inner diameter (A) of the outside sleeve.
Allowable limit (A): 125.5 mm
4
5
3
C
1
A
A
