33
ELECTRICAL SYSTEM
LIGHT AND SWITCHES OPERATION INSPECTION
1. Place the vehicle on the main stand and start the engine.
NOTE
Some functions do not work as long the engine is not running.
2. Now you can test one by one the functions of all switches, the
function of the rear and front light and the brake light.
Switches/ Functions - left side
1.
High/ Low beam switch
2. PASSING Flash
light
3.
Indicator
switch
4.
Horn
switch
Switches/ Functions - right side
5.
Engine OFF/ON
6.
Light
switch
7.
Starter
Button
HEADLIGHT AIMING INSPECTION
1. Place the vehicle at a distance of 5 meters in front of a wall.
The vehicle must be placed horizontally.
2. Measure the distance from the ground to the middle of the
headlight bulb (X).
3. Transfer this value to the wall and mark it with an (X).
4.
7KHQPDNHDVHFRQG;FHQWLPHWHUEHORZWKH¿UVW;
5.
7RDGMXVWWKHKHDGOLJKWDFFHVVIURPEHORZWRWKHKHDGOLJKW
6.
6FUHZWKHDGMXVWPHQWQXWLQRURXWWRVHWWKHKHDGOLJKWLQ
correct position.
4
3
1
2
6
7
8
5 cm
X
5 m
X
1
