119
ELECTRICAL SYSTEM/ SWITCHES AND SENSORS
HANDLE SWITCH
Left side
1.
Dimmer
switch
2. Passing
Pass light switch
3.
Turn signal switch
4.
Horn switch
Right side
5.
Engine “stop switch”
6.
Light
switch
7.
Starter
button
NOTE
As long the engine stop switch is “ON” (
) the vehicle cannot be
started.
HANDLE SWITCH INSPECTION
1. Remove
the
head cover with speedometer and winkers.
2. Disconnect the related handle switch cable.
3. Use a continuity tester to measure the switches as shown in
the illustrations below.
4. In case of damage the handle switch need to be replaced
complete and does not need to be repaired.
RIGHT HANDLE SWITCH INSPECTION
1. Remove the rear handlebar cover.
2. Use a continuity tester to measure the switches as shown in
the illustrations below.
3. In case of damage the handle switch need to be replaced.
Starter switch (1)
G/Y
P
Starter switch
Starter switch pressed
Light switch (2)/ (3)
Y/R
R/W
Y (O/BL)
X
Z
Light off
Position light (2)
Position light (3)
Light on (2)
Light on (3)
Yellow (Y) can also be Orange/Blue (O/BL).
The letters X, Z and C are simply selected letters.
4
3
1
2
7
6
5
Engine “stop switch“ (4)
Dg
R/W
C
Stop switch
Stop switch pressed
1
G/Y
P
3
2
Y
R/W
R/W
Y/R
4
R/W
Dg
P
Z
C
