5 Installation at Site
23 of 36
AmaRoc
Fig. 7:
Transporting the submersible mixer
5.5.3 Adjusting the attachment point
The correct attachment point must be selected in order to ensure reliable installation
and problem-free lifting and lowering of the submersible mixer on the submersible
mixer stand.
Amaprop 1200 - 2500
Fig. 8:
Inclination angle approx. 5°
For trouble-free lifting and lowering, an inclination angle of approx. 5° must be
maintained (higher end = propeller end) when the mixer is suspended by the lifting
bail. If the angle deviates from the requirements, the attachment point must be
adjusted.
Correcting the attachment point:
1.
Slightly loosen bolts 901.03 on guide bracket 732 and bolt 901.04 on mating
ring carrier 476.
2.
Undo the upper bolted connection on the lifting bail.
3.
Select the correct hole in the lifting bail, depending on the required inclination
of the mixer.
CAUTION
Loose or insufficiently tightened screwed connections
Damage to the installation parts during operation
▷
Observe the tightening torques.
