5 Installation at Site
19 of 36
AmaRoc
8.
Screw on and tighten the locknuts.
CAUTION
Failure to remove the eyebolt (attachment point for transport)
Contact between eyebolt and submersible mixer
Incorrect operating position of submersible mixer!
▷
Replace eyebolt with hexagon head bolt.
9.
Free-standing model: Remove the eyebolt and replace with hexagon head bolt
5
/
8
x 1
3
/
16
[M16x30] and washer.
5.4.3 Fitting the square guide rail
1.
Cut square guide rail to length and deburr.
Length for free-standing installation: end of guide rail max. 20" [0.5 m] above
the water surface
Length for installation with upper holder: fixing points of upper holder at least
4
3
/
4
" [120 mm] below the tank edge
2.
Weld together the square guide rail and the square guide rail extension, if
required.
3.
Insert the square guide rail into the locating sleeve of the submersible mixer
stand as far as it will go.
4.
Remove the eyebolt.
