Krüger & Matz HD4347, Owner'S Manual

Page: 40 / 88

40
Owner’s manual
English
RESET THE SYSTEM
Press the power button to turn on the unit, hold the TUNER and STEREO DIRECT buttons at the
same time for about 3 seconds, the system will be reset.
Note: If you hold the TUNER and STEREO DIRECT buttons at the same time for more than 3
seconds, all the memory will be deleted.
BLUETOOTH MODULE OPERATION
Pair this receiver with Bluetooth external device before first use. Pairing needs to be done only once.
Pairing
1. Press the Bluetooth button on the remote control to activate Bluetooth mode.
2. Turn on the Bluetooth on your external device, and search for other devices.
3. Connect it with the Bluetooth module: place it near the system and set it into the pairing mode.
Insert default password “0000” if necessary. When Bluetooth device is connected its name
appears on the receiver’s display.
Operation
Once you perform pairing with a given external device, connect the devices as instructed below:
1. Turn ON the Bluetooth on the external device
2. Activate Bluetooth mode on the amplifier (press the Bluetooth button on the remote control).
3. Begin to play music on the Bluetooth enabled external device
Note:
1. Remote control operation is not guaranteed for all Bluetooth enabled devices.
2. It must be necessary that the Bluetooth device supports AVRCP profiles.