Krüger & Matz HD4347, Owner'S Manual

Page: 27 / 88

27
Owner’s manual
English
through the various adjustment circuits (bass, treble, etc.) This allows for reproduction of the
sound with greater fidelity, and at the same time disables any settings made with bass, treble,
balance.
31. DYNAMIC
Press this button repeatedly to get the desired dynamic range, for Dolby Digital or DTS mode
only.
32. / select previous track
33. / Press to start, pause or resume playback.
34. / select next track.
35. BLUETOOTH
Select Bluetooth input source
BATTERY INSTALLATION
1. Remove the battery compartment cover.
2. Insert two “AAA” batteries. Make
sure the batteries are inserted
with their positive “+” and
negative “-” poles positioned
correctly.
3. Close the cover until it clicks.
Notes:
• Even if the remote control unit
is operated within the effective
range, remote control operation
may be impossible if there are
any obstacles between the unit
and the remote control.
• If the remote control unit is
operated near other appliance which generates infrared rays, or if other remote control devices
using infrared rays are used near the unit, it may operate incorrectly.
• The power is turned on/off (standby) by pressing the POWER button on the remote control unit
in standby mode.
• Remove the batteries if the remote control is not going to be used for an extended period of time.
• Do not use and old battery and a new one together.
• Do not drop or cause impact to the remote control.
• Do not spill water or any liquid on the remote control, nor place it on wet surfaces.
• Do not place the remote control under the direct sunlight or near sources of heat.
• Clean this remote control only with soft, slightly damp cloth.
• Do not heat or disassemble batteries and never dispose of old batteries by throwing them in a fire.
REMOTE CONTROL OPERATION
1. Point the remote control towards the remote sensor IR of the front of the unit.
2. Make sure that there is no obstacle between the infrared remote sensor of the unit and remote
control.