Krüger & Matz HD4347, Owner'S Manual

Page: 30 / 88

30
Owner’s manual
English
right-channel audio inputs and outputs (typically labeled “R”). Use white plugs to connect left-channel
audio inputs and out-puts (typically labeled “L”). And use yellow plugs to connect composite video inputs
and outputs.
• Push plugs in all the way to make good connections (loose
connections can cause noise or malfunctions).
• To prevent interference, keep audio and video cables away from
power cords and speaker cables.
CABLES & JACKS
VIDEO/AUDIO
HDMI HDMI connections can carry
uncompressed standard or
high-definition digital video
and audio and offer the best
picture and sound quality.
AUDIO
Optical digital
audio cable
Offers the best sound quality
and allows you to enjoy
surround sound (e.g., Dolby
Digital, DTS). The audio
quality is the same as for
coaxial.
Coaxial
digital audio
cable
Offers the best sound quality
and allows you to enjoy
surround sound (e.g., Dolby
Digital, DTS). The audio
quality is the same as for
optical.
Analog audio
cable (RCA)
L
R
This cable carries analog
audio. It’s the most common
connection format for analog
audio, and can be found on
virtually all AV components.
LOUDSPEAKER CONNECTIONS
Caution:
To avoid damaging the speakers with a sudden high-level signal, be sure to switch the power off before
connecting the speakers.
• Check the impedance of your speakers.
• Dedicated speaker impedance is 8 ohms or more. The amplifier’s red speaker terminals are
the + (positive) terminals and the black terminals are the – (negative) terminals.
• The + side of the speaker cable is marked to make it distinguishable from the – side of the cable.
Connect this marked side to the red + terminals and the unmarked side is the black terminal.
• Prepare the speaker cords for connection by stripping off approximately 10 mm or less (no
more as this could cause a short-circuit) of the outer insulation. Twist the wires tightly together
so that they are not straggly.
Right!
Wrong!