39
Owner’s manual
English
OSD SETUP
1. Press the OSD button on the remote control. The menus will be shown on your video display.
2. Use the UP and DOWN arrow keys ( /
) to highlight “OSD setup” and press the ENTER
button to select.
3. Use the UP and DOWN arrow keys ( /
) to highlight “Language” and the LEFT and RIGHT
arrow keys ( /
) to choose language.
4.
When you have finished, press the OSD button to return to the previous menu level.
AUTO SETUP
Auto Setup function optimizes the speaker settings automatically.
To perform the automatic calibration, follow the below steps:
1. Connect the calibration mic wire to LINE IN socket.
2.
Place the calibration microphone at the listening position (same height as listeners' ears).
3. Press the OSD button on the remote control. The menus will be shown on your video display.
4. Use the UP and DOWN arrow keys ( /
) to highlight “Auto setup” and press enter to start.
Note:
Make sure there are no obstacles between the calibration microphone and the speakers during the calbration.
Summary of Contents for HD4347
Page 2: ......
Page 86: ...86 Notes ...
Page 87: ......
Page 88: ...www krugermatz com is a registered trademark ...
