Krüger & Matz HD4347, Owner'S Manual

Page: 25 / 88

25
Owner’s manual
English
15. POWER-CORD PROTECTION: The power supply cables should be routed so that they are
not likely to be walked on or pinched by items placed upon or against them, paying particular
attention to cables at plugs and the point where they exit from the product.
16. Do not use unauthorized accessories as they may damage the unit.
17. Unplug this product from the wall outlet and refer servicing to qualified service personnel under
the following conditions:
• If the unit exhibits sudden unusual operation or unusual display characteristics.
• If liquid has been spilled, or objects have fallen into the product.
• If the product has been exposed to rain or water.
• If the product has been dropped or damaged in any way.
• If the product exhibits a distinct change in performance.
18. SERVICING: Do not attempt to service this product yourself as removing cover may expose
you to dangerous voltages or other hazards. Refer all servicing to qualified service personnel.
19. Do not disassemble the device, as it may cause risk of electric shock. The product has no
user-serviceable parts inside.
20. LIGHTNING: For added protection for this product during a thunderstorm, or when it is left
unattended and unused for long period of time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent damage to the product due to lightning and
power line surges.
21. NOTES ON USE:
• Avoid high temperatures
• Allow for sufficient heat dispersion when installed on a rack.
• Handle the power cord carefully.
• Hold the plug when unplugging the cord.
• Keep the set free from moisture, water and dust.
• Unplug the power cord when not using the set for long periods of time.
• Do not obstruct the ventilation holes
• Never disassemble or modify the set in any way.
REMOTE CONTROL
1. Standby button (turn on/off)
2. APS
Automatically program stations - In tuner mode, press this button to allocate and memorize
radio station automatically.
3. PTY Search
Press to search by program type when in Tuner mode.
4. TUNER
Press to select TUNER input source
5. ST/MONO button
Change between stereo and mono tuning modes when the tuner is the source and the FM
band is selected. Do not operate when other external sources are selected.
6. /- buttons
Tuning radio stations
7. MEMORY button
Memorizing a radio station into a preset
8. DISPLAY button
Switches display information on and off
9. OSD
(On-screen display)
Pressing this button toggles the on-screen display (OSD) menu system on and off.
10. SPK SETUP button
Press this button repeatedly to select the speaker’s settings you want to change.