Krüger & Matz HD4347, Owner'S Manual

Page: 26 / 88

26
Owner’s manual
English
11. LFE TRIM
This button lets you adjust the level of the low-frequency effects (LFE) channel in a movie soundtrack
or multi-channel music recording. Press to activate the control, then use the directional control up/
down buttons to raise or lower the LFE level. Note that this is an LFE level control, not a subwoofer
level control, so it will work only on 5.1 soundtracks that contain an LFE.
12. BASS/TREBLE
Bass/Treble adjustment
13. CH SEL
Channel selection. Press the button repeatedly
to cycle through the channels.
14. /-
Volume adjustment
15.
Select and adjust settings
16. SUB VOL
Adjust the subwoofer volume
17. BD/DVD
Select BD/DVD input.
18. VIDEO1
Select VIDEO 1 input.
19. DELAY
Press this button to select the desired setting
speaker, then press the “up/down“ buttons to
setup the speaker delay time.
20. VIDEO 2/3
Select VIDEO 2 input.
21. AUX
Select AUX input.
22. LINE IN
Select LINE IN device input
23. MUTE button
Press to mute/unmute the sound on all outputs.
24. DTS/DOLBY
When playing 5.1CH source, and while you are
enjoying Stereo, push this button to playback
source in DTS/DOLBY DIGITAL.
25. DOLBY PLIIx
When playing analogue/digital PCM or 2CH DOLBY source, push this button to playback
5.1CH source
26. SURROUND
Press to select the surround sound listening mode.
27. AUDIO IN
Press to select analog inputs, digital inputs and HDMI decoding for the currently selected
source.
28. SUB ON/OFF
Turn the subwoofer connection on/off.
29. STEREO
Press to activate STEREO mode. With the unit in the STEREO mode, only front left and front
right speakers are working.
30. STEREO DIRECT
DIRECT mode selection (when ON, sound signals are output directly, without being passed