![background image](http://html1.mh-extra.com/html/krown/100/100_instruction-manual_2004969034.webp)
Krown 100 has Voice Carry Over to transfer your voice over the line and receive the baudot back from
a Relay operator. If your Krown 100 comes with the VCO feature, you are now able to make a VCO
call by the following:
To make a VCO call:
1. Press SHIFT-DIAL and then type the number of the State Relay. If you entered the State Relay
number in setup before, you can type CTRL-R to auto dial Relay. If the last call you made
was to Relay, you can also use CTRL-DIAL to redial the Relay number.
2. When receiving a Relay message, type “VCO CALL PLS GA” on the keyboard of the
Krown 100.
3. Press CTRL-V. The display will show:
4. You will receive the prompt from the Relay operator to start voice. Now you can speak the
number you want to dial to the mouthpiece of your attached telephone or get close to your
Krown 100 to use the internal microphone.
5. Finish the call by using CTRL-9 and then CTRL-V to turn off VCO mode.
*NOTE: Voice Carry Over is optional for the Krown 100. Call the manufacturer to have it installed.
XI
31
HOW TO MAKE A VCO CALL (VOICE CARRY OVER)*
CTRL
+
V
VCO MODE ON
CTRL
+
9
CTRL
+
V