THE MEMORY (CONT.)
You can use the arrow keys to move forward or backward through the text.
Moves to the right.
Moves to the left.
To move quickly in a stored message, press the CTRL key and an arrow key at the same time.
The display will keep showing more text on the side of the arrow until you release the key.
Move continuously through a stored message.
When you are done looking at the message, press CTRL and 9 (SAVE) to store the message again and
clear the screen.
Saves the message.
EDITING A STORED MESSAGE
To change the information in a stored message, you need to access the area in which the message is
stored (see page 15).
Use the arrow keys to move forward or backward in the text to reach the part you want to change.
Whatever you type in a memory area will replace any material unless you turn on the insert mode first.
Ex: Chooses area M1
To change an entire message:
Type over an existing message to replace it with new information, then type CTRL and 9 to save the
new information. You may also erase all the information in a memory area (see page 16).
To change part of a message:
Move the cursor to the point where you want to make a change, and then delete or insert characters at
the point where you want to make the change.
To delete a character:
Type CTRL and 7 (DELETE), and the character above the cursor will be deleted. You must press
CTRL and 7 for each character that you want to delete.
Deletes a single character.
BCDEF
ABCDE
CTRL
+
EFGHIJKLMNO
CTRL
+
ABCDEFGHIJ
CTRL
+
9
CTRL
+
5
EDIT: MESSAGE (1-5) PHONE (D)IRECTORY
(A)UTO-ANSWER (E)MERGENCY-ADDR E(X)IT
1
HELLO GA
CTRL
+
7
ELLO GA
15
