![background image](http://html1.mh-extra.com/html/krown/100/100_instruction-manual_2004969011.webp)
I
8
GETTING STARTED
TO SETUP YOUR KROWN 100
Place your Krown 100 near your telephone. The power unit is connected to a regular power outlet and
the Krown 100 is used with your telephone.
• Be sure that the ON/OFF switch on the TDD is OFF.
• Plug small end of adapter cord into small hole at back of TDD.
• Plug AC Adapter/Charger into an electrical wall-outlet.
• Keep both ends plugged in even when machine is not being used for a telephone call.
Plug one end of your modular into the telephone wall jack. Plug the other end into either jack on the
back of your TDD. The second jack can be used to connect your telephone set or signaling device to
the TDD.
THE LIGHTS AND SWITCHES
Phone Light
Shows sounds heard on the telephone line.
Power Light
Show status of power. When the light shows:
RED = Power is ON
GREEN = Low battery power
NO LIGHT = Power is OFF
Power Switch
This switch turns the power ON and OFF
Print Switch
This switch turns the printer ON and OFF.
PRINTER
POWER
OFF
ON
POWER
PHONE
Krown
Manufacturing, Inc.