ID.: 17-16-20-2976-06 | 6.2017
35
9 Disposal
The device has a lifetime of at least 8 years if the instructions for safe use and maintenance
are considered. Individual components have different lifetimes, this is why they have to be
replaced with new parts in cases of possible malfunctions, wear and mechanical damage.
Replacement can be performed only by using technically adequate or original replacement
parts.
At the end of the device’s lifespan the entire device must be taken to the depot for electronic
equipment according to the classification of wastes. The device falls into the category of large
household wastes.
10 Care and maintenance
For reliable and efficient operation of the device it has to be regularly cared for and maintained.
CAUTION
The device may only be cleaned with water or damp cloth. The use of detergents,
solvents and / or cleaners containing tensides is prohibited and can lead to
damage to the device.
Perform regular checks of the device’s operation, be sure to inspect:
The operation of the safety valve on the water supply installation.
Cleanliness of the surface of the evaporator.
If the surface of the evaporator is dirty, order cleaning with the authorised installer who
performed the installation of the device. We recommend to also order an inspection of the
device along with the cleaning.
11 Disturbances in the operation
Before contacting the authorised service, check whether:
The power supply is directly connected to the main electrical cabinet.
Only this device is connected to the power cable from the main electrical cabinet.
The connecting cable is damaged.
The air flow through the device is unobstructed (dirt, grills ...).
The temperature of intake air is higher than the minimal air temperature at which the
generator still operates.
12 Electrical wiring diagram
1
Compressor - generator
9
Relay panel
2
Fan
10
Screen
3
Compressor condenser
11
Temperature sensor NTC - evaporator
4
Pressure switch
12
Optitronic keyboard
5
Temperature sensor NTC - water
13
Safety thermostat
6
Connecting clips for regulating fan speed
14
Electrical clip
7
Connecting clip for the supply cable
15
Standard supply cable with plug
8
Connectors for the external signal
16
Electric heater
