Krone Swadro 810, Operating Instructions Manual, Page: 32 / 64

IV - 4
Handling the swather when in use
Fold the tine arms from transport to working position.
• To release the rotor locking device, detach tension
spring (1) from tine securing clamp (2) and attach
to hole (3)
• Move rotors from transport to working position (see
section „Conversion from transport to working
position“).
• Remove linch pin (1).
• Pull out pin (2).
• Fold tine arms (3) into working position. It may be
necessary to turn the rotor until, when folding tine
arms, they do not collide with the guard.
• Insert pin (2) and secure with linch pin (1).
4.3.5 Folding the tine arms into working
position
Pin (2) must always be inserted from the
top with the respective tine arm in the
front part of the rotor (tines must touch
the ground).
Shut down the engine and remove the
ignition key. Secure tractor and rotary
swather against rolling away!
4.3.6 Moving the external guard bars into
working position
Fold external lateral guard bars (1) at the front left and
right of the machine into working position and lock them
with the hitch pin (2). Secure hitch pin (2) with hairpin
clip (3).
3
2
1
2
1
SW700010
SW700036
1
2
3
3
1
SW810024
1
2
3