Krone Swadro 700, Operating Instructions Manual, Page: 43 / 64

VI - 1
Care and maintenance
6 Care and maintenance
6.1 Special safety instructions
• Repair, maintenance and cleaning work as well as the rectification of malfunctions may only
ever be carried out with the drive is switched off and the engine is at a stand still! – Remove
the ignition key!
• Avoid skin contact with oil and grease.
• With injuries caused by oil escaping under pressure, get the assistance of a doctor
immediately.
• Follow all further safety instructions, to avoid accidents and injuries.
Regularly check (all 50 h) that nuts and bolts are properly seated and tighten if necessary!
Seeing following tables for torques.
6.2 General instructions
In order to guarantee trouble-free operation of the rotary swather and to minimize wear,
definite care and maintenance intervals must be observed. This includes the cleaning,
greasing, lubrication and oiling of assemblies and components.
Torque M
A
(unless otherwise stated)
A = Thread size
(Resistance class can be seen on bolt head)
M 4
M 5
M 6
M 8
M 10
M 12
M 14
M 14x1.5
M 16
M 16x1,5
M 20
M 24
M 24x1.5
M 24x2
M 27
M 27x2
M 30
5.6
29
42
350
6.8
2.2
4.5
7.6
18
37
64
100
160
8.8
3.0
5.9
10
25
49
85
135
145
210
225
425
730
800
1100
1150
1450
10.9
4.4
8.7
15
36
72
125
200
215
310
330
610
1050
1150
1550
1650
2100
Ø
12.9
5.1
10
18
43
84
145
235
255
365
390
710
1220
1350
1800
1950
2450
A
M
A
(Nm)
8
. 8
1
0 .
9
A
KR-1-130
800 Nm
SW700040