Krone Swadro 700, Operating Instructions Manual, Page: 16 / 64

II - 4
2.3.6 Maintenance
1. Repair, maintenance and cleaning work as well as the
rectification of malfunctions may only ever be carried
out when the drive is switched off and the engine is at
a standstill!
- Remove the ignition key! Pull the parking brake for
the balancing weight.
2. Regularly check that nuts and bolts are properly seated
and tighten if necessary!
3. When doing maintenance work to a raised implement,
always use suitable means to secure it against falling.
4. When replacing working tools with cutting edges, use
suitable tools and gloves!
5. Dispose of oils, greases and filters according to
regulations!
6. Always disconnect the power supply before working on
the electrical system!
7. If protective devices and guards are subject to wear,
check them regularly and replace them in good time!
8. When doing electrical welding on the tractor and
attached implements, disconnect the alternator and
battery cables!
9. Replacement parts must at least comply with the
technical requirements set by the manufacturer of the
implements!
This is guaranteed when using genuine KRONE
replacement parts!
10. Only use nitrogen for filling pneumatic accumulators -
Risk of explosion!