Krone Swadro 2000 Original Operating Instructions Download Page 86 | Manualshive

Page: 86 / 262

Krone Swadro 2000 Original Operating Instructions Download Page 86

KRONE operation terminal Gamma

86

Pos : 16.24. 56 / BA/ Info-C enter/ Sc hwader/Bedienei nheit - Komf ort/ Swadro 1400/Haupt menüs/H aupt menü 4 Ser vice/Menü 4- 4 Akt ort est H and @ 7\ mod_1215417049746_78.doc @ 101179 @ 3 @ 1

6.14.3 Menu 4-4 "Manual Actuator Test"

The actuator test is used to test the actuators installed on the machine. An actuator can only be
tested if power is flowing through it. In the manual actuator test the actuator must therefore be
controlled manually for a short time to be able to determine if there are any errors in the
actuator system.

Caution!

The PTO must not be turning during the actuator test.
The tractor hydraulics must be deactivated.

Fig. 57

Displaying the menu

Main menu 4 "Service" is called.

•

You can select menu 4-4

with the rotary potentiometer. The icon is displayed

inversely.

•

Press the rotary potentiometer.

The display shows menu 4-4 "Manual actuator test".

Selecting the actuator

•

Select the actuator with the rotary potentiometer.

The selected actuator is displayed inversely.

Pos : 16.24. 57 / BA/-----Seitenumbr uch------ @ 0\ mod_1196175311226_0.doc @ 4165 @ @ 1

«
...
84
85
86
87
88
...
»

Summary of Contents for Swadro 2000







































































































































































































































































Reviews:

No comments