ISOBUS operation
175
Pos : 24.7 /BA/ Info-C enter/ Iso- Bedienung/ BigPac k/ Abweic hende Funkti onen z um KRON E I SO BU S-Ter mina CC I @ 47\ mod_1285223499328_78. doc @ 455993 @ 2 @ 1
9.2
Differing functions to KRONE ISOBUS terminal CCI
Via the accessory unit, the ISO control unit will provide information and control functions to the
display of the ISO terminal. Operation with an ISO terminal is analogue to the KRONE ISOBUS
terminal CCI. Prior to start-up, refer to the operating instructions for the method of operation of
the KRONE ISOBUS terminal CCI.
A fundamental difference to the KRONE ISOBUS terminal CCI is the arrangement of the
softkeys, which are determined by the selected ISO terminal.
Only the functions that differ from the KRONE ISOBUS terminal CCI are described in the
following.
Pos : 24.8 /BA/ Info-C enter/ Iso- Bedienung/ Sc hwader/Abweichende F unktionen CCI _Ter minal Automati kz eit @ 56\ mod_1294996225046_78.doc @ 539878 @ @ 1
Note
The adjustment of the Automatic Time which is set in the basic screen “Lifting the rotors” for
KRONE comfort control, is set on the ISO terminal with the selection key predetermined by the
ISO terminal (see operating instructions of the ISO terminal manufacturer).
Pos : 24.9 /BA/ Info-C enter/ Iso- Bedienung/ Abweic hende Funkti onen CC I_T er m Menüpunkt 1-4 „Kontras t“ @ 48\ mod_1286276672656_78. doc @ 460458 @ @ 1
Note
Menu item 1-4 "Contrast" of the KRONE control cannot be called up on the ISO terminal. A
setting is performed directly via the ISO terminal (if applicable) (refer to operating instructions of
the ISO terminal manufacturer).
If necessary, acoustic signals must be enabled from the terminal (refer to operating instructions
of the ISO terminal manufacturer).
Pos : 24.10 / BA/-----Seit enumbruc h------ @ 0\ mod_1196175311226_0. doc @ 4165 @ @ 1
Summary of Contents for Swadro 2000
Page 261: ......