Krone Swadro 2000 Original Operating Instructions Download Page 203

Page: 203 / 262

Settings

203

Pos : 36 /BA/ Einstell ung en/Sc hwader/ Eins tell en der Aus hubhöhe in Vorgewendest ellung SW 2000 @ 22\ mod_1239784801254_78.doc @ 233265 @ 2 @ 1

13.2

Setting the lifting height in headland position

SW2000015

Fig. 146

The lifting height of the rotor in the headland position is determined by the position of the sensor
(1) on each outrigger arm.

Adjusting the sensor (1) also adjusts the lifting height.

Move the sensor in the "+" direction: Lifting height is increased.

Move the sensor in the "-" direction: Lifting height is decreased.

Pos : 37 /BA/-----Sei tenumbruch------ @ 0\ mod_1196175311226_0.doc @ 4165 @ @ 1

Summary of Contents for Swadro 2000







































































































































































































































































Search results

Summary of Contents for Swadro 2000

Reviews:

Krone Swadro 2000, Original Operating Instructions, Page: 203 / 262

Search results

Summary of Contents for Swadro 2000

Reviews: