Krone Swadro 2000 Original Operating Instructions Download Page 100 | Manualshive

Page: 100 / 262

Krone Swadro 2000 Original Operating Instructions Download Page 100

Control Unit – Auxiliary Control

100

Pos : 20.3.3 /BA/ Inf o-C ent er/ Sc hwader /Bedi enei nheit - M edium/ Anbau @ 36\ mod_1260880356866_78. doc @ 337134 @ 2 @ 1

7.1

Mounting

Figure. 63

•

Fasten the support (1) using the drill holes (2) already present.

•

The control unit (3) is fixed by the magnetic plate (4) on the support (1).

Pos : 20.3.4 /BA/ Inf o-C ent er/Hi nweis Bedienei nheit muss pr obl emlos vom F ahr esitz aus bedi ent wer den @ 36\ mod_1260363833832_78. doc @ 336474 @ @ 1

Note

Install the control unit with the support (1) in that way, that the control unit can be operated from
driver´s seat without any problems.

Pos : 20.3.5 /BA/-----Seit enumbruc h------ @ 0\ mod_1196175311226_0. doc @ 4165 @ @ 1

«
...
98
99
100
101
102
...
»

Summary of Contents for Swadro 2000







































































































































































































































































Reviews:

No comments