Krone Swadro 2000 Original Operating Instructions Download Page 85 | Manualshive

Page: 85 / 262

Krone Swadro 2000 Original Operating Instructions Download Page 85

KRONE operation terminal Gamma

85

Pos : 16.24. 53 /Ü bersc hrift en/Ü bersc hrift en 3/A- E/Akt ortes t @ 0\ mod_1200916990791_78. doc @ 47833 @ 3 @ 1

6.14.2 Actuator test

Pos : 16.24. 54 / BA/ Sic her hei t/G ef ahrenhi nweis e/ Akt ort est @ 47\ mod_1285134152781_78. doc @ 455729 @ @ 1

Danger! - Unexpected actions on the machine.

Effect: Danger to life or serious injuries.
•

Only persons familiar with the machine are permitted to perform the actuator test

•

The person performing the test must know which machine parts are moved by actuating
the actuators. If necessary, secure the actuated machine components against
unintentional lowering

•

The actuator test must only be performed from a safe position outside the area that is
affected by machine parts moved by the actuators

•

Make certain there are no persons, animals or objects in the danger zone

Pos : 16.24. 55 / BA/-----Seitenumbr uch------ @ 0\ mod_1196175311226_0.doc @ 4165 @ @ 1

«
...
83
84
85
86
87
...
»

Summary of Contents for Swadro 2000







































































































































































































































































Reviews:

No comments