Krone AMT 4000 CV, Operating Instructions Manual

Page: 34 / 46

32
Maintenance
A specific order must be observed when tightening
the wheel nuts.
CAUTION: Check the air pressure in the tyres
regularly.
Check the wheel nuts 10 operating hours after they
have been fitted. Thereafter, check every 50
operating hours.
• Repair work on the tyres must only be carried out by specialist personnel and only
with suitable tools.
• The machine should be supported securely when working on the tyres. Secure from
rolling away unintentionally. The machine should be supported securely when raised.
• Never walk under the raised machine.
• Mounting work on the tyres requires sufficient knowledge of the work process
involved and correct tools.
• Do not stand in front of the wheel rim when filling the tyres with compressed air. If
the air pressure is too great, the tyre could burst . This can cause injury.
5.5 Tyres
Tyre type Air pressure [bar]
Transport wheel 10.0/75 - 15.3 4
Working wheel 15.0/55 - 17 1,5
size black zinc-plated
Thread Spanner Torque moments M
A
[Nm]
M18 x 1,5 24 265 245
NOTE
AMT-1-054
5
1
3
6
4
2