17
Preparing for operation
•
Activate the single-action control unit
•
The working wheels (3) and (4) are lowered
completely
•
Bring the machine into the transport position using
the double-action control unit
•
The transport wheels (1) and (2) lower
•
The swinging drawbar also swivels round
•
Then run the working wheels (3) and (4) with the
single-action control unit
CAUTION: The diagram opposite shows the
machine when unhitched. The machine must
always be hitched when carrying out a swivel
operation
2.5 Disassembling the disc mower
Before disassembling, switch off the
engine, remove the ignition key and
secure the tractor from rolling away.
•
Undo the retaining chain (1)
•
Pull out the PTO shaft (2) and rest on the support
•
Raise the rear hydraulics slightly.
There is a danger of crushing hands and
feet when activating the jack stand.
•
Pull out the spring pin (2) and bolt (1)
•
Lower the jack stands (3) and (4)
•
Secure using bolts and spring pins
•
If the swivel cylinder (1) is fully exten-
ded (transport wheels down, working
wheels up), close the shut-off taps (red
and blue).
•
Connect the lights and check that they
are functioning correctly before
travelling on public roads.
AMT4-0-040
2
1
AMT4-0-013
1
AMT4-0-012
1
4
3
2
AMT4-0-014
3
1
2
4
2
Summary of Contents for AMT 4000 CV
