COMMISSIONING / OPERATION
3
23
VFC 200
www.krohne.com
06/2019 - 4005059401 - AD VFC200 PB-PA R01 en
77
9
Config. - Operation Info
94
8
Runtime data failure
95
8
Runtime execution failure
96
8
SE - not connected
97
8
SE - Reset
98
8
SE - Cyclic data failure
99
8
SE - Diagnosis failure
100
8
SE - Parameter update failure
101
8
SE - not supported
102
8
SE - Power supply failure
Table 3-15: Diagnosis information
1
Indication is supported if Classic Diagnosis is active only.
2
Indication is supported if Condensed Diagnosis is active only.
3
Indication is supported in cyclic diagnosis only if Ident. number 4541 hex is active. Nevertheless this
information is always available via acyclic access (e.g. by using DD / DTM) for all Ident. numbers supported.
yes
Indication is supported for all Ident. numbers.
4
If available readout more detailed diagnosis information using the device display ("Device -> Errors -> Message
View" (menu C6.4.1) or "Device -> Errors -> Message History View" (menu C6.4.2)) or the PROFIBUS parameter
"Device Status Complete [Slot 0, Index 176]" or parameter "Device Status Complete History [Slot 0, Index 178]"
via "DD"/ "DTM" and try to clear faults displayed.
5
If available readout more detailed diagnosis information using the device display ("Device -> Errors -> Message
View" (menu C6.4.1) or "Device -> Errors -> Message History View" (menu C6.4.2)) or the PROFIBUS parameter
"Device Status Complete [Slot 0, Index 176]" or parameter "Device Status Complete History [Slot 0, Index 178]"
via "DD"/ "DTM" and try to fix the problem(s) occurred.
6
If available readout more detailed diagnosis information using the device display ("Device -> Errors -> Message
View" (menu C6.4.1) or "Device -> Errors -> Message History View" (menu C6.4.2)) or the PROFIBUS parameter
"Device Status Complete [Slot 0, Index 176]" or parameter "Device Status Complete History [Slot 0, Index 178]"
via "DD"/ "DTM" and checkout which sort of "Function check" is running.
7
If available readout more detailed diagnosis information using the device display ("Device -> Errors -> Message
View" (menu C6.4.1) or "Device -> Errors -> Message History View" (menu C6.4.2)) or the PROFIBUS parameter
"Device Status Complete [Slot 0, Index 176]" or parameter "Device Status Complete History [Slot 0, Index 178]"
via "DD"/ "DTM" to get a more detailed overview about all additional information just present
8
Detailed information of the PROFIBUS module itself
–
no more detailed information available.
9
Classification is changeable by the user himself
–
have a look at chapter "Variable Event Groups".
Bit Number
Supported
De
sc
ription
Remedy
