KROHNE VFC 200, Supplementary Instructions Manual

Page: 34 / 40

4
PROFIBUS SETTINGS
34
VFC 200
www.krohne.com 06/2019 - 4005059401 - AD VFC200 PB-PA R01 en
C3.3.6.2 Time Constant Set time constant for this function block.
C3.3.6.3 Error Behavior Defines the behaviour of this function block in case of errors.
Setting:
Replace Value: The "replacement value" will be used as OUT value;
Hold Value: Last valid OUT value stored will be used as OUT value;
Ignore Error: OUT has the wrong calculated value and status "Bad" as
calculated"
C3.3.6.4 Replacement Value Defines the value that replaces the measured value at this function block in
case of an error.
C3.3.7 FB Analog Input 5
C3.3.7.1 Measurement Setting:
Volume Flow; Norm. Volume Flow; Mass Flow; Gross Power; Net Power;
FAD; Density; Temperature 1; Temperature 2; Pressure; Vortex Frequency;
Velocity; Specific Enthalpy; Specific Heat Capacity; Reynolds Number
C3.3.7.2 Time Constant Set time constant for this function block.
C3.3.7.3 Error Behavior Defines the behaviour of this function block in case of errors.
Setting:
Replace Value: The "replacement value" will be used as OUT value;
Hold Value: Last valid OUT value stored will be used as OUT value;
Ignore Error: OUT has the wrong calculated value and status "Bad" as
calculated"
C3.3.7.4 Replacement Value Defines the value that replaces the measured value at this function block in
case of an error.
C3.3.8 FB Analog Output
C3.3.8.1 Measurement Setting:
Temperature External; Pressure External
C3.3.8.2 Unit Setting:
°
C;
°
F;
°
Rank; K; atm; bar; mbar; Pa; Pa (abs); kPa; Mpa; psi; psi (abs); torr;
g/cm ² ; kg/cm ²
C3.3.8.3 Error Behavior Defines the behaviour of this function block in case of errors.
Setting:
Replace Value: The "replacement value" will be used as OUT value;
Hold Value: Last valid OUT value stored will be used as OUT value;
Ignore Error: OUT has the wrong calculated value and status "Bad" as
calculated"
C3.3.8.4 Replacement Value Defines the value that replaces the measured value at this function block in
case of an error.
C3.3.9 FB Totalizer 1 (same menu structure as stated within C4.3)
C3.3.10 FB Totalizer 2 (same menu structure as stated within C4.4)
C4 Totalizer C4 Totalizer C4 Totalizer C4 Totalizer
C4.3 FB Totalizer 1
C4.3.1 Set Starts / stops the totalizer and defines its value if stopped.
Setting:
Totalize: Totalizing is started / is in progress (Normal operation of the
totalizer).
Reset: Totalizing is stopped, 0.0 is assigned to the totalizer.
Preset: Totalizing is stopped, the preset value is assigned to the totalizer.
Function Setting / Description