6
TECHNICAL DATA
28
SD 200 W/R
www.krohne.com
01/2020 - 4003851304 - MA SD 200 W/R R04 en
Inputs
Inputs
Inputs
Inputs
Type A
4...20 mA with signal calibration feature.
Accuracy
Resolution: 14 bit Error
≤
0.1% FS
Span
0.001...3000 units with variables decimal position.
Offset
-1500...3000
Update time
4 times a second
Voltage drop
max. 2 Volt
Operational
Operator functions
Displayed functions
Top line: main display value
Bottom line: measuring unit and messages
Main display value
Digits
4 digits (height: 26 mm / 1")
Units
Analysis-unit-package - pH, mV, mS/cm,
μ
S/cm,
k
Ω
*cm, M
Ω
*cm
Multiparameter-unit-package - pH, mV, mS/cm,
μ
S/cm, k
Ω
*cm, M
Ω
*cm,
°
C,
°
F,
°
K, g/l, mg/l,
µ
g/l, %,
‰
, ppm, ppb, NTU, FNU, EBC, AU, FAU, S/cm, S/m,
mS/m,
µ
S/m, mbar, bar, psi, mm, cm, m, inch, ft,
mmwc, cmwc, mwc, inwc, ftwc
Decimals
0 - 1 - 2 - 3
Approvals and certificates
Approvals and certificates
Approvals and certificates
Approvals and certificates
CE
This device fulfils the statutory requirements of the EC directives. The manufacturer certifies successful testing of the
product by applying the CE mark.
For full information of the EU directives and standards and the approved certifications, please refer to the EU
declaration or the website of the manufacturer.
Electromagnetic compatibility:
EMC Directive 2014/30/EU
Hazardous areas
Hazardous areas
Hazardous areas
Hazardous areas
ATEX approval:
II 1 G Ex ia IIC T4 Ga
II 1 D Ex ia IIIC T 100
°
C Da
IECEx approval:
Ex ia IIC T4 Ga
Ex ia IIIC T 100
º
C Da
CSA approval:
Class I, II, III, Division 1, Groups A to G
Ex ia IIC
Class I, Zone 0 AEx ia IIC T4
