4
START-UP
20
SD 200 W/R
www.krohne.com
01/2020 - 4003851304 - MA SD 200 W/R R04 en
Each function has a unique number, which is displayed beside the word "SETUP" at the bottom of
the indicator. This indicator has 2 functions-groups: 1 FUNCTION, 2 OTHERS. Press SELECT to
select a function.
After selecting a sub-function, the next main function is selected by scrolling through all "active"
sub-functions (e.g. 1
, 11
, 12
, 13
, 14
, 1
, 2
etc.).
Change or select a value:
•
Press
briefly, PROG will start flash
•
Select a value by pressing
or
•
Press
to confirm the value / selection
To change a value, use
to select the digits and
to increase that value. To select a setting,
both
and
can be used.
When data is changed but ENTER is not pressed, then the modification can still be cancelled by
waiting for 20 seconds or by pressing ENTER for three seconds: the PROG-procedure will be left
automatically and the former value reinstated.
To return to OPERATOR-level press
for 3 seconds.
In order to return to the operator level, PROG will have to be pressed for three seconds. Also,
when no keys are pressed for 2 minutes, SETUP will be left automatically.
INFORMATION!
Modification will only be set after ENTER has been pressed!
