Manual OPTISENS AAM 1050
OPTISENS AAM 1050
6
1.
Set up
1. OPTISENS AAC 050 Converter
2. Outlet
3. OPTISENS AAS 1000 Sensor
4. Sampling point
5. Flow monitor with build-in Pt100
6. Inlet
7. Automatic Sensor Cleaning (ASR)
2.
Installation
The measuring system is delivered ready-to-use. It can be mounted directly to a wall via 4 predrilled holes.
Water connection
Connect the water inlet on the left side and the outlet on the right side of the flow cell. The outlet can be an
open outlet (pressureless) or the water can be re-directed into a pipe or basin.
ATTENTION
Install the instrument at a place where mechanical and chemical stress is limited.
Mind the protection class: IP 65 (with closed terminal cover)
ATTENTION
The sensors are delivered with protective caps, which have to be removed before mounting into the flow cell.
1
2
3
4
5
6
7
