Operation & Installation Manual V12-V6 2010-05-31.doc
31/05/2010
6/60
America:
•
The ALTOSONIC V12 is certified for use in potentially explosive atmospheres
according to FM with following standards as:
FM3600
FM3615
Canada:
•
CRN
•
The ALTOSONIC V12 is certified for use in potentially explosive atmospheres
according to CSA with following standards as:
C22.2 No. 30
C22.2 No. 0.4
Other Standards/Countries:
•
Australia
IECEx PTB 10.0013X
•
Algeria:
N
o
005/DIR/ONML/10DU 07/02/2010
•
China:
PAC 2009-F265
•
Malaysia
Sirim
•
Singapore
Spring
1.3 Information concerning the documentation.
1.3.1. Important information regarding safety.
To prevent any risk regarding the safety of operators and in order avoid damage to the flow
meter or other equipment, it is essential that you read the information in this document
carefully. Also observe applicable national standards, safety requirements and accident
prevention regulations.
If this document is not in your native language or if you have any problems understanding the
text, we advise you to contact your local KROHNE office for assistance. KROHNE cannot
accept responsibility for any damage or injury caused by misunderstanding of the information
in this document.
This document is provided to help you establish operating conditions, which will permit safe
and efficient use of this flow meter. Special considerations and precautions are also
described in the document, pictograms as shown below are used to focus attention to these
sections.
1.4 Display conventions
The following symbols are used to help you navigate this documentation more easily:
These warning signs must be observed without fail. Even only partial disregarding
such warnings can result in serious health damage, damage to the flow meter itself
or to parts of the operator’s plant.
This symbol designates safety advice on handling electricity.
