Kranzle 11/130, Operating Maintenance Installation

Page: 8 / 56

Safety Information
8
Safety Information
Important !!!
The machine must be disconnected from the power supply
when servicing work is being carried out. The master
switch should be in position "0" and the plug out of the socket.
Do not use the cleaner if electrical connections or other
safety-relevant parts (e.g. overpressure valve, high
pressure hose, spraying equipment etc.) are damaged.
The machine may only be used by persons who have
received the necessary training.
Never operate the machine without supervision.
The water spray can be dangerous. It should never be directed at people,
animals, electrical apparatus or the machine itself.
Never direct the spray at power sockets.
Parts of the machine interior and parts of the gun and lance become hot when hot
water is used. Leave the cover of the machine closed when using the machine
and do not touch the metallic parts of the gun and lance.
Children must not use high pressure cleaning equipment.
Do not damage the cable or repair it incorrectly.
Do not pull the high pressure hose if there are kinks or loops in it. Make sure that
the hose is not damaged on sharp edges.
Persons operating the machine should wear the necessary protective clothing, i.e.,
waterproof clothing, rubber boots, safety goggles, headwear etc. It is prohibited to
use the machine in close vicinity to people lacking suitable protective clothing.
The high pressure spray can generate a high level of noise. If noise exceeds the
maximum allowed levels, users and others in the vicinity must wear suitable ear protection.
The high pressure spray causes recoil and additional twisting movement if the gun
is angled. The gun must therefore be held firmly with both hands. (see page 2)
Do not close off the exhaust aperture on the topside of the machine. Do not
bend over this aperture and do not put your hands inside it. Exhaust gases are
very hot!
Do not clamp down the trigger of the gun. Apply the safety catch after use, in order
to prevent accidental spraying.
Do not spray against matter containing asbestos or other hazardous substances.
Never spray liquids containing solvents, such as paint thinner, petrol, oil, or anything
similar. Note the specifications of the additive makers! The seals in the machine
are not resistant to solvents. The spray vapour of solvents is highly inflammable,
explosive and poisonous.