Kranzle 11/130, Operating Maintenance Installation

Page: 27 / 56

27
High
pressure
connection
Heating chamber
Water inlet
Detergent
Pipeline plan
Safety valve, number
5 must be set approx.
15 % higher than the
unloader valve on the
HP pump
1 Float valve, water inlet
2 Water tank
3 Control valve, detergent
4 High pressure pump
with integrated unloader valve
5 Pressure switch Motor Start/Stop
6 Pressure switch Burner release
7 Safety valve for heating coile
8 Flow controller
9 Fuel pump with solenoid valve
10 Fuel filter
11 Fuel tank
Warranty
This warranty covers material and/or workmanship related defects only and does not
extend to ordinary wea r.
Machine must be operated a ccording to enclosed operatin g instructions which are part of
present warran ty conditions.
All products sold directly to private customers are warrantied for a period of 24 months,
whe re as the warranty p eriod for industrial purchases is limited to 12 months.
In case of any warranty claim s, please h ave your HP cleaner together with accessories
and your purch ase documen t read y and contact your nearest dealer or authorized service
point which can also be looked up in t he internet at www.kraenzle.com .
Warranty is vo id in case of attempts to m odify any o f the safety de vices or in the event of
exceeding temperature or rpm limits - this also applies to undervoltage, low water and/or
pollute d water. Gaug e, nozzle, valves, sealing gaskets, high pressure hose and spray
equipme nt a re conside red wear parts and do not fall under this warranty.