VS-82HDxl - Operating the VS-82HDxl 8x2 SD/HD-SDI Matrix Switcher
21
2. Press the required preset number that you want to recall.
The RCL button no longer lights and the retrieved configuration input buttons
light.
6.7
Locking and Unlocking the Front Panel
To lock and unlock the front panel buttons
:
1. Press and hold the Panel Lock button until the button lights.
The front panel buttons are locked.
2. Press and hold the Panel Lock button again until the button no longer lights.
The front panel buttons are unlocked.
6.8
Resetting the Device to Factory Default Values
To reset to factory default values
:
1. Turn the
VS-82HDxl
off.
2. Press and hold the Reset button on the rear panel while turning the device
on.
3. After approximately five seconds release the Reset button.
The device is reset to its factory default values (see
Section
8
).
6.9
Upgrading the Firmware
For instructions on upgrading the firmware see “
Upgrading the
VS-82HDxl
Firmware Using the K-Upload Software
”.
Note
: When updating the firmware, the device number must be set to 1, (see
Section
5.1.1
).