VS-82HDxl - Connecting the VS-82HDxl 8x2 SD/HD-SDI Matrix Switcher
13
2. Connect the serial controller, (for example, a PC) to the first device (ID 1 or
master) using an RS-232 connection (see
Section
5.3
).
3. Set the first
VS-82HDxl
unit as device ID 1 and the following seven
VS-82HDxl
units as device ID 2 to device ID 8.
Figure 5: Controlling Multiple VS-82HDxl Devices using RS-485 Serial Communication
5.5
Connecting to the VS-82HDxl Using Ethernet
You can connect the
VS-82HDxl
via the Ethernet, using a crossover cable (see
Section 5.5.2
) for direct connection to the PC or a straight through cable (see
Section
5.5.3
) for connection via a network hub or network router.
After connecting the Ethernet port, you have to install and configure your Ethernet Port. For
detailed instructions, see the “Ethernet Configuration (FC-11) guide.pdf” file in the technical
support section at
http://www.kramerelectronics.com
.