20
VS-82HDxl - Operating the VS-82HDxl 8x2 SD/HD-SDI Matrix Switcher
3. Select the Genlock input:
If you want to use one of the digital inputs, select the input that you want to
use for the genlock.
The selected input button lights and the input is selected,
Or,
If you want to use the analog genlock input, press the Off button.
The Off button lights and the analog genlock signal is selected.
4. Press and hold the STO and RCL buttons simultaneously.
Both buttons no longer light.
6.6
Storing and Recalling a Switch Setting from a Preset
You can use the store facility to remember up to 16 switch configurations and
recall any of them at a later time using the RCL button.
To store a setting
:
1. Select the switching configuration that you want to store by pressing the
required Input buttons.
2. Press and hold the STO button.
The STO button and the last selected preset button lights.
3. Press the number of the preset in which you want to store the configuration,
where the top row of Input buttons represents preset numbers 1 to 8 (left to
right), and the bottom row represents 9 to 16.
The selected preset number lights.
4. Press and hold the STO button.
The STO button no longer lights and the selected inputs flash.
To recall a setup
:
1. Press and hold the RCL button.
The RCL button lights as well as the last selected preset number.