![background image](http://html1.mh-extra.com/html/kramer/vs-82hdxl/vs-82hdxl_user-manual_2001420013.webp)
10
VS-82HDxl - Connecting the VS-82HDxl 8x2 SD/HD-SDI Matrix Switcher
To connect the VS-82HDxl 8x2 SD/HD-SDI Matrix Switcher as illustrated in
the example in
Figure 3
:
1. Connect up to eight SDI sources to the SDI Input BNC connectors, (for
example, HD/SD SDI cameras to Input 1, 2 and 7, and an SDI VTR to
Input 8).
2. Connect the SDI Output BNC connectors to up to four SDI acceptors (for
example, HD/SD SDI displays to outputs 1A and 2A).
3. Connect the two HDMI output connectors to up to two HDMI acceptors (for
example, a projector to HDMI OUT 1).
4. If required, set the DIP-switches (see
Section
5.1
).
5. If required, connect and set the genlocking source (see
Section
5.2
and
Section
6.5
).
6. If required, connect a controller to the:
RS-232 port (see
Section
5.3
)
RS-485 port (see
Section
5.4
)
Ethernet connector (see
Section
5.5
)
7. Connect the power cord and power the device on.
5.1
Setting the Device Number and Termination
DIP-Switches
When connecting more than one device using the RS-485 bus, you must set the
device number and the bus termination on the Setup DIP-switches accordingly.
Figure 4: VS-82HDxl Setup DIP-Switches
The following table defines the functions of each switch.