36
VS-6464DN - Using the Configuration Menu
4. Press 1 to turn off all outputs or 2 to perform a factory reset of all options.
Caution:
Selecting option 2 to perform a factory default reset clears all setups,
options and configuration.
5. Press TAKE and wait a few seconds.
The following is displayed:
Are you Absolutely sure !!!
Once more TAKE to confirm
6. Press TAKE.
The following is displayed:
Matrix erased!!!
Please, wait …
The matrix and device configuration are erased. After a few seconds the next
option on the Config Menu is displayed.
7.2.8
Config Menu
—Display Firmware Versions
This option displays the main and front firmware versions.
To display the firmware versions:
1. Press MENU twice.
The following message is displayed:
start configuration menu
MENU to view setup ENT to change them
2. Press MENU until the following is displayed:
Main Firmware Version:
1.0
Front Firmware Version: 1.0
3. Either:
Press BREAKAWAY to exit the Config Menu
Wait approximately 15 seconds for the operation to time out