![background image](http://html.mh-extra.com/html/kramer/vs-6464dn/vs-6464dn_user-manual_2001398024.webp)
20
VS-6464DN - Operating Your Video Matrix Switcher
6.3
Confirming Actions
You can choose to work in the At Once (default for all actions except
storing/recalling) or the Confirm mode.
In the At Once mode:
The TAKE button does not light
Pressing an OUT-IN combination implements the switch without further user
confirmation
You save time as execution is immediate and actions require no user
confirmation
No protection is offered to correct an erroneous action
In the Confirm mode:
The TAKE button lights
You enter an action and then confirm it by pressing the TAKE button
Every action requires user confirmation, protecting against erroneous actions
Execution is postponed until you confirm the action
Failure to press the TAKE button within a few seconds results in the action timing out
automatically
6.3.1
Toggling between the At Once and Confirm Modes
To toggle between the At Once and Confirm modes:
Note:
If the TAKE button is flashing you cannot toggle between the At Once and
Confirm modes. A flashing TAKE button indicates that an action is currently
pending confirmation.
1. Press TAKE to toggle between the At Once mode and the Confirm mode.
The TAKE button lights and actions now require user confirmation.
2. Press the lit TAKE button to toggle from the Confirm mode back to the At
Once mode.
The TAKE button is no longer lit and actions no longer require user
confirmation.